Remove This Item
1220mm high x 1975mm long
This is the same as VK5R 1220 kit but with no small bins at the top. It fits almost all vans on the market. This kit is usually installed down the drivers side of the van. If you have a van with a sliding door on the drivers side and you want access to the shelving through that door you could install the VK5R1220 Reverse Bay Kit.
The default colour for the bins is as per the main image, you can select your our colours with the drop down tabs above.
Installation: The upright square posts fit over the round upright post welded to the foot. The foot is tek screwed to the floor and the top brackets are fixed to the side of the van or nearest supporting structure. This is a welded frame for easier installation.
Installation instructions are available in the documents tab.
Dimensions: 1220mm high x 1975mm wide x 310mm deep (the depth is the widest tray in the kit, in this case the tr3/950)
Additional Information
| Weight | N/A |
|---|---|
| Cube | .51 |
| Location in Van | Drivers Side Full Length |
| Frame Height | 1220mm High |
| Frame Width | 1975mm Wide |
| Tray Width | 950mm Wide |
Shopping Options
- Colour
- Location in Van
- Frame Height
-
- 685mm High (2)
- 895mm High (9)
- 1220mm High (19)
- 1545mm HIgh (2)
- Frame Width
-
- 685mm Wide (6)
- 1345mm Wide (5)
- 1000mm Wide (13)
- 1975mm Wide (8)
- Tray Width
-
- 633mm Wide (11)
- 950mm Wide (21)
