Remove This Item
1220mm high x 1000mm wide
This is based on our most popular van shelving kit (the VK4R1220) and it fits almost all vans on the market. We have removed the small row of bins at the top for those who do not carry any small components. For short wheel base L300’s and compact vans such as the VW Caddy or Holden Combo you can get the VK4R1120 kit which is the same configuration of trays and bins but with a slightly shorter frame to suit these vehicles. This kit can be installed in nearly any position in a van, most commonly over the rear wheel arches, but it can it can be installed behind the front seats facing back or facing out a sliding door.
The default colour for the bins is as per the main image, you can select your our colours with the drop down tabs above.
Installation: The upright square posts fit over the round upright post welded to the foot. The foot is tek screwed to the floor and the top brackets are fixed to the side of the van or nearest supporting structure. This is a welded frame for easier faster installation.
Dimensions: 1220mm high x 1000mm wide x 310mm deep (the depth is the widest tray in the kit, in this case the tr3/950)
Additional Information
| Weight | N/A |
|---|---|
| Cube | .26 |
| Location in Van | Drivers Side Behind Sliding Door, Passenger Side |
| Frame Height | 1220mm High |
| Frame Width | 1000mm Wide |
| Tray Width | 950mm Wide |
Shopping Options
- Colour
- Location in Van
- Frame Height
-
- 685mm High (2)
- 895mm High (9)
- 1220mm High (19)
- 1545mm HIgh (2)
- Frame Width
-
- 685mm Wide (6)
- 1345mm Wide (5)
- 1000mm Wide (13)
- 1975mm Wide (8)
- Tray Width
-
- 633mm Wide (11)
- 950mm Wide (21)
