Remove This Item
1345mm wide x 1220mm high
This kit can go behind the front seats of a van but if installing behind the front seats please be aware that this frame is full height and rear visibility for the driver will be affected. Or it can be installed down the side of a van, most commonly over one of the rear wheel arches as in most vans it matches the distance from the rear door to the sliding door. This is a bolted frame.
The default colour for the bins is as per the main image, you can select your our colours with the drop down tabs above.
Installation: The upright square posts fit over the round upright post welded to the foot. The foot is tek screwed to the floor and the top brackets are fixed to the side of the van or nearest supporting structure. This is a bolted frame and some assembly is required.
Installation instructions are available in the documents tab.
Dimensions: 1220mm high x 1345mm wide x 310mm deep (the depth is the widest tray in the kit, in this case the tr3/630)
Additional Information
| Weight | N/A |
|---|---|
| Cube | .55 |
| Location in Van | Drivers Side Behind Sliding Door, Passenger Side, Across Van Behind Seats |
| Frame Height | 1220mm High |
| Frame Width | 1345mm Wide |
| Tray Width | 633mm Wide |
Shopping Options
- Colour
- Location in Van
- Frame Height
-
- 685mm High (2)
- 895mm High (9)
- 1220mm High (19)
- 1545mm HIgh (2)
- Frame Width
-
- 685mm Wide (6)
- 1345mm Wide (5)
- 1000mm Wide (13)
- 1975mm Wide (8)
- Tray Width
-
- 633mm Wide (11)
- 950mm Wide (21)
