Remove This Item
1220mm high x 685mm wide
This kit is the narrowest kit you can install in a standard height van with the top row of small bins removed. It could be installed most vans and would usually be installed behind the front seats facing the rear or down the side of a van if only a small amount of shelving is required. If installing behind the front seats please be aware that this frame is full height and rear visibility for the driver will be affected.
The default colour for the bins is as per the main image, you can select your our colours with the drop down tabs above.
Installation: The upright square posts fit over the round upright post welded to the foot. The foot is tek screwed to the floor and the top brackets are fixed to the side of the van or nearest supporting structure. This is a welded frame to improve the speed of installation.
Installation instructions are available in the documents tab.
Dimensions: 1220mm high x 685mm wide x 310mm deep (the depth is the widest tray in the kit, in this case the tr3/630)
Additional Information
| Weight | N/A |
|---|---|
| Cube | .27 |
| Location in Van | Drivers Side Behind Sliding Door, Passenger Side, Across Van Behind Seats |
| Frame Height | 1220mm High |
| Frame Width | 685mm Wide |
| Tray Width | 633mm Wide |
Shopping Options
- Colour
- Location in Van
- Frame Height
-
- 685mm High (2)
- 895mm High (9)
- 1220mm High (19)
- 1545mm HIgh (2)
- Frame Width
-
- 685mm Wide (6)
- 1345mm Wide (5)
- 1000mm Wide (13)
- 1975mm Wide (8)
- Tray Width
-
- 633mm Wide (11)
- 950mm Wide (21)
