VK4FR Frame - 1000W x 685H Bolted with feet

This is the lowest 1000mm wide frameg. It could be installed in a ute with a false floor or sliding draw or behind the seats in a van if only a small amount of storage is required. This frame suits any of the 950mmwide trays and can take a maximum of three trays depending on the tray size.

The upright post has 12 slots and this is a bolted frame (see individual tray descriptions for the numbers of slots required for each tray). The frame is constructed from 25.4mm square mild steel tube with a 1.6mm wall. It is made from New Zealand steel which is fabricated and powder coated in New Zealand.

Installation: This kit has no bottom bar.  The feet tek screw to the floor and the square upright post goes over the round post on the foot.  To ensure that the upright posts are spaced correctly insert at least one tray before fixing the feet.  The top brackets needs to be fixed to the nearest supporting structure. This is a bolted frame and some assembly is required.

Installation instructions are available in the documents tab.

Dimensions: 685mm high x 1000mmwide.